Dimensions: | up to 5000 mm | Thickness: | from 2 to 12 mm | |
Jacketed material: |
SS 304L SS 316L SS 321 SS 430 Soft Iron Duplex |
Copper Brass Aluminium Titanium Nickel Nickel alloys |
Filler material: |
Graphite PTFE Ceramic fibres Glass fibres Non asbestos |
![]() |
MP 1004 / MP 1005 Single jacketed gaskets: they are used for relatively narrow applications. Made by encasing a soft filler on one face and both edges with metal. MP 1006 / MP 1007 / MP 1008 Double jacketed gaskets: they are used when complete protection of the filler is required. They also provide additional support of the flanges at the outer edges thanks to an overlapped jacket. They are made of a soft filler completely enclosed by a metal shell and a top washer. MP 1009 Overlapped jacketed gaskets: they are used when a completely enclosed gasket is required whose width is smaller than the one available in the plain double jacketed series. MP 1010 Double shell, double jacketed gaskets: they are used when a gasket having greater strength and rigidity is required. They are made of a soft filler by two reversed and overlapping metal shells. MP 1011 / MP 1012 Corrugated jacketed gaskets: the corrugated jacketed increases the gasket resistance. This type employs an asbestos-free filler completely enclosed by a corrugated metal shell and a top washer. If a slight leakage occurs through the inner edge, the concentric corrugations act as labyrinth seal. Sealing capacity can be further improved by using adhesive layer ribbon. MP 1013 / MP 1014 Corrugated jacketed gaskets with corrugated metal insert: like corrugated jacketed type with a corrugated metal insert. This 3-ply design provides a more resistant construction that adapts to cyclicle operating temperature problems. |